TinyBoy2

From TinyBoy 3D Printer
Revision as of 13:36, 22 November 2016 by Wanleung (Talk | contribs) (Specification)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

TinyBoy 2

The second version of the TinyBoy 3D Printer.

After the TinyBoy 1 open-sourced, the TinyBoy team did a lot of improvements on the TinyBoy 2 to make a much easier way on the deployment to the schools.

TinyBoy 2 comes in two different sizes, L10 and L16, which allows the users to select portability and build volume to suit their needs.

TinyBoy 2 makes the print size larger and print speed faster, but keeps almost the same body size of the TinyBoy 1.

Some of the important plastic parts from our kit will be manufactured using injection molding, to improve the printing quality.

TinyBoy 2 is now launched on Indiegogo. https://www.indiegogo.com/projects/tinyboy-2-3d-printer-for-education

The campaign is for the preparation of the mass production.

TinyBoy 2 is planning to be opened after the shipping of the 1st slot. So users can replicate an extra printer by themselves and printing the injection molding parts for replacement.

Specification

TinyBoy 2 Lite

  • Size: 14.6cm(W) x 16.5cm(D) x 23.0cm(H) (excl. filament holder)
  • Printed size : 10cm x 10cm x 10cm (Designed specification)
  • Nozzle No: 1
  • Nozzla Diameter: 0.3mm
  • Filament Diameter: 1.75mm
  • Filament Material: PLA (Recommended) / other filament < 250'C
  • Power: DC 12V, 6A
  • Recommended Printing Speed: 60mm/s
  • Board: RAMPS 1.4 + Arduino Mega 2560

TinyBoy 2 L10

  • Size: 15.5cm(W) x 17cm(D) x 22cm(H) (excl. filament holder)
  • Printed size : 10cm x 10cm x 10cm
  • Nozzle No: 1
  • Nozzla Diameter: 0.3mm
  • Filament Diameter: 1.75mm
  • Filament Material: PLA (Recommended) / other filament < 250'C
  • Power: DC 12V, 6A
  • Recommended Printing Speed: 60mm/s
  • Board: MKS SMELZI (Modified Melzi (1284p) by MKS)

TinyBoy 2 L16

  • Size: 15.5cm(W) x 17cm(D) x 28cm(H) (excl. filament holder)
  • Printed size : 10cm x 10cm x 16cm
  • Nozzle No: 1
  • Nozzla Diameter: 0.3mm
  • Filament Diameter: 1.75mm
  • Filament Material: PLA (Recommended) / other filament < 250'C
  • Power: DC 12V, 6A
  • Recommended Printing Speed: 60mm/s
  • Board: MKS SMELZI (Modified Melzi (1284p) by MKS)

Assembly Guide